ROCKEY4/NetROCKEY4 operates the parallel port through the device driver, and uses error correction technology at the communication protocol level. Therefore, it is compatible with most printers. However, there are a few models of printers that receive a large amount of current or electricity when powered off. This can cause a voltage shortfall to the dongle and result in a communication problem with the dongle driver. This problem can be easily solved by turning on the printer or removing the printer cable from the dongle.
If you are using or testing ROCKEY products, we will send our updates to you when there are any. You may also download the latest development packages and updates from our product page download section.
Rockey4 Driver Download
Download: https://urlgoal.com/2vK5fA
The parallel port was not designed to connect many devices at the same time, and in theory only one device can be attached to the parallel port at any one time. With the users in mind, ROCKEY4/NetROCKEY4 was designed to allow the standard devices, such as printers and scanners, to attach to it, but we cannot guarantee that ROCKEY4/NetROCKEY4 is compatible with all these devices. Unplug the device attached to ROCKEY/NetROCKEY to see if it is a compatibility problem.19. The system cannot find the USB ROCKEY4/NetROCKEY4, why?Perhaps the drivers are not properly installed. Please refer to solution C for Question 18.
The diversity of computers leads to many different parallel modes, ROCKEY4 dongles support most modes, but for some special modes it is possible that the system cannot find ROCKEY4, or ROCKEY4 dongles do not work well with them. What you need to do is to change the parallel modes, eg. set the port mode in the CMOS setup to ECP or vice versa. If the operating system is Windows NT/2000, you may have to reinstall the driver after you have changed the parallel port modes.
Sometimes, the PC drivers may be conflicted or it may be conflict with any of the programs although this is highly rare. Solution: Restart the PC and run the program again. If it still cannot run, try starting up the PC with minimal drivers and programs and check to see if it can run. If it can, this means that it is a software conflict.
You will still need to install the drivers for the dongles either using the InstDrv.exe installation file or InstDLL.dll file. Otherwise, the dongles will not be able to be detected by the system and your program will give you an error. If you have already installed the proper drivers, please refer to question 2 above.
If the driver listed is not the right version or operating system, search our driver archive for the correct version. Enter Feitian Technologies Co. ROCKEY4 into the search box above and then submit. In the results, choose the best match for your PC and operating system.
Once you have downloaded your new driver, you'll need to install it. In Windows, use a built-in utility called Device Manager, which allows you to see all of the devices recognized by your system, and the drivers associated with them.
Any error with a USB key is usually related to the correct Windows device driver not being installed on the computer for the Rockey4 device. We have become aware that some recent MS Windows updates trashes the driver and it needs to be re-installed. If you are not very confident with navigating around your Windows operating system, we recommend that you get your IT guru to help you with this.
First check to see if the green LED light on the Rockey4USB key/dongle is a steady or flashing. If it is flashing then it is not working correctly. Unplug the dongle and plug it into a different USB slot. This often has the effect of the USB port finding the correct driver. If the green LED stops flashing, then you're good to go. If it is still flashing, then we must delete the old driver and re-install one that works.
DETAILED STEPSFollow these steps carefully - don't skip any. Particularly the step to remove the old driver and rebooting your PC to make sure that the old version is completely removed.
Now we must completely remove any old/new drivers for the Rockey4 USB key. Open up Control Panel, then Device Manager, and expand the list for Universal Serial Bus (USB) Controllers. If anything is installed there for Rocky4, right click on it, and select uninstall.
If the light was already a steady green or is a steady green now and the Roof Wizard software is still giving you the wrong message, then you may need to try another method of installing the drivers. In this case go to the following link.
This will download a folder to your computer that contains a Word document with more detailed instructions on this topic and a few other files. Follow the instructions that are appropriate to your computer and it should operate as normal again.
For old RkUSB keys the drivers will be installed automatically during the installation of Clarity. If the installation did not proceed as expected or you have an old version of Windows, follow the procedure below.
In most cases, Rockey4.sys file problems lead to "blue screen" errors and are due to a missing or corrupted DriverPack Solution device drivers (attributed to virus / malware infection) or faulty associated hardware. Downloading and replacing your SYS file can fix the problem in most cases. After the problem file is replaced, running a driver scan will ensure all device drivers are updated (which could be the source of the Rockey4.sys error).
DriverPack Solution-related hardware or software installations can cause Rockey4.sys BSOD errors. Ordinarily, Rockey4.sys-related Blue Screen errors happen when a Parted Magic LLC-related device driver is loaded, during the install of DriverPack Solution or related program, or while Windows is starting or shutting down. Recording Blue Screen Rockey4.sys errors associated with DriverPack Solution is crucial to locating faults and relaying back to Parted Magic LLC for repair options.
Blue Screen Rockey4.sys errors are often caused by related hardware, software, device driver, or firmware problems. They can be related to DriverPack Solution or Parted Magic LLC hardware, but not always.
Recommendation: We highly recommend that most Windows users (unless you are advanced) download a driver update tool like DriverDoc [Download DriverDoc - Product by Solvusoft] to help update your Feitian Technologies Co USB drivers. This Windows utility downloads, installs, and updates your ROCKEY4 drivers automatically, preventing you from installing the wrong driver for your OS.
ROCKEY4 is prone to system errors related to corrupt or outdated device drivers. PC drivers can become problematic without any obvious cause. The good news is that the USB system driver can always be modified to solve the laptop dilemma.
It is not straightforward to get ROCKEY4 drivers due to Feitian Technologies Co's large and confusing official website. You might be a PC veteran, but locating, installing, and manually upgrading ROCKEY4 drivers can still take a long time and totally frustrate you. Incorrect hardware drivers can lead to more serious issues than just a faulty installation.
Changing drivers is a very tedious and complicated process, so why not use a driver update software? An advanced driver update tool guarantees that you have all new driver versions, confirms that updates are compatible, and provides a backup of your current drivers. Driver backups offer an instant, secure way to restore a driver to an earlier configuration, if needed.
Download Rockey4.sys(adsbygoogle = window.adsbygoogle []).push();How to Fix Rockey4.sysRepair Sys ProblemsFixing a corrupted or missing Rockey4.sys error is an easy process with a few steps. Open the zip-file you downloaded.Extract the .sys file to a location on your computer. We recommend you to unzip the file to the directory of the program that is requesting the file.If that doesn't work, you will have to extract the file to your system directory.By default, this is C:/WINNT/system32/drivers (Windows NT/2000).or C:/Windows/system32/drivers (Windows XP, Vista, 7).(adsbygoogle = window.adsbygoogle []).push();Make sure overwrite any existing files (but make a backup copy of the original file)That should be it. Although not necessary you can reboot your computer as well.(adsbygoogle = window.adsbygoogle []).push();
The Rockey USB/LPT and Sentinel USB/LPT HW keys are not functional due to the installation of the wrong driver. This situation occurs in case this HW key was connected to the PC before the installation of the correct driver (Clarity). It can be solved by uninstalling the wrong driver and installing the correct one. You can find such info in the chapter describing the certain HW key.
Before you do anything, ensure the corresponding port (USB, LPT) is enabled in the BIOS settings (integrated peripherals). The drivers can be installed even if it is not enabled, however, the key will not function then.
The AzRockey.exe program installs the newest Rockey4 Device Drivers so EVERKEY programs can access Rockey4 Keys.This release supports "silent install" so you can suppress all Az-Tech screens and logos. These drivers support all EVERKEY Version 6 programs including the Kechk32.dll and Renew32.exe programs from Version 2.
Rockey4.sys is a Windows driver. A driver is a small software program that allows your computer to communicate with hardware or connected devices. This means that a driver has direct access to the internals of the operating system, hardware etc.The free file information forum can help you determine if Rockey4.sys is a Windows system file or if it belongs to an application that you can trust.
Description: Rockey4.sys is not essential for the Windows OS and causes relatively few problems. Rockey4.sys is located in the C:\Windows\System32\drivers folder.The file size on Windows 10/8/7/XP is 22,016 bytes. The driver can be started or stopped from Services in the Control Panel or by other programs.The program is not visible. Rockey4.sys is not a Windows system file. The file is a Microsoft signed file.Rockey4.sys appears to be a compressed file.Therefore the technical security rating is 8% dangerous. 2ff7e9595c
Comments